5
7.
Powering on the UPS
NOTE:
The battery will charge fully during the first five hours of normal operation. Full battery
run capability is not possible during the initial charge period.
Press the ON/Mute button on the front panel
for two seconds
to turn on the power to the
UPS.
8.
Install software
For optimal computer system protection, install UPS monitoring software to fully configure UPS
shutdown. Please follow steps below to download and install monitoring software.
1. Go to the website
https://www.v7world.com/ups-downloads
2. Select ViewPower software for your operating system to download the software.
3. Follow the on-screen instructions to install the software.
1.4 Internal Battery Replacement
Note:
This UPS is equipped with internal batteries and only a trained technician should replace
the batteries.
Replace with V7 Replacement Battery Cartridge RBC1RM2U3000V7
Replace the batteries if icons
and
are flashing in the LCD display and alarm is
sounding every 2 seconds.
Do not disconnect battery connectors under load. To remove input power to change the
batteries, press the OFF button on the front panel for two seconds to power off the UPS and
switch off utility power where the UPS is connected.
DO NOT DISCONNECT the batteries while the UPS is in Battery mode.
A small arc may occur when connecting the internal batteries. This is not harmful to the UPS or
personnel. Connect the cables quickly and firmly.
CAUTION - Risk of electric shock
. After the UPS is disconnected from the mains (building
wiring outlet), internal components are still connected to the battery and pose an electric
hazard.
Before performing service and/or maintenance, disconnect the batteries and verify that no
current or hazardous voltage exists in the terminals of high capability capacitors.
To avoid electrical shock, turn off the unit and unplug it form the AC power source before
servicing the battery
CAUTION - Risk of electric shock
. The battery circuit is not isolated from the input voltage.
Hazardous voltages may exist between the battery terminals and the ground. Before touching,
please verify that no voltage is present.
CAUTION
- Do not dispose of batteries in a fire, they could explode.
CAUTION
- Do not open or mutilate batteries. Released electrolyte is harmful to the skin and
eyes and may be toxic.
