1. Dyna-Mic.01 Handheld Microphone
1. Dyna-Mic.01 Handheld Microphone
INCLUDED ACCESSORIES
www.v2gotech.com
V2GO Technology Corp.
V2GO Technology Corp.
California, U.S.A
California, U.S.A
Patent(s) pending
Copyright 2007 V2GO Technology Corp.
Rev. DM01-051707-2
All Rights Reserved
Patent(s) pending
Copyright 2007 V2GO Technology Corp.
Rev. DM01-051707-2
All Rights Reserved
MICROPHONE MAINTENANCE AND USAGE TIPS
MICROPHONE MAINTENANCE AND USAGE TIPS
Your V2GO Dyna-Mic.01 is a sensitive instrument. Avoid:
1. Dropping or hitting the microphone
2. High levels of humidity or moisture
3. Temperatures over 120 degrees Fahrenheit
4. Blowing into the microphone
5. Slapping the microphone to see if it is operating
Clean your V2GO Dyna-Mic.01 with a clean cloth slightly moistened
with water. Do not ever use any petroleum product to clean your
system.
Periodically unscrew the metal mesh from the end of your handheld
wireless microphone. Inside the metal mesh cover you will find a
black sponge material. Carefully remove the black sponge and
gently hand wash it in cold water with a small amount of soap. Rinse
the black sponge and allow it to dry completely before reassembly.
The use of a foam cover over the steel mesh of the microphone is not
normally needed. In some cases the foam cover will muffle the voice
and degrade the overall audio quality. However, when using the
V2GO Dyna-Mic.01 outdoors on a breezy day, a foam windscreen is
recommended.
Envision the steel mesh of your handheld wireless microphone as an
“eye ball”. If this “eye ball” can see (or otherwise points at) a
speaker, feedback is likely. Whenever possible, position the singer
either facing the speaker(s) or slightly behind the speaker(s).
All microphones work best when the singer is singing directly into
the very end of the steel mesh of the microphone, not the side.
Remember, a microphone is not magic - when using a microphone,
sing loudly. A microphone is unable to create a pleasant tone from a
whisper.
(1)
(1)
(1)
(1)
(2)
(4
)
(4
)
(4)
(1)
(1)
(1)
2 Dyna-Mic.01 Receiver Base
.
2 Dyna-Mic.01 Receiver Base
.
3. Dyna-Mic.01 Power Adapter
3. Dyna-Mic.01 Power Adapter
4. Audio output cable
4. Audio output cable
5. AA battery
6. System A Labels
6. System A Labels
7. System B Labels
7. System B Labels
8. User ’s manual
8. User ’s manual
9. Warranty Card
9. Warranty Card
10. Portable anti-shock PET package
10. Portable anti-shock PET package
4
Operating
Frequency
2.4GHz--2.483GHz
Frequency
Response
20Hz~20KHz
/
1.5dB
Noise
<
0.5mV
Effective
Distance
Sampling
Rate
44.1KHz/16bit
Operating
temperature
0
~ 50
℃ +
℃
Output
Level
Package
Size
10mV( 0mV Input)
1
Handheld wireless microphone
Transmitter
power
Average 17dB/50mW
Dimension
50mmX50mmX260mm
Net Weight
0.38KG
Power
Supply
2xAA 1.5V alkaline
batteries
>=25hrs
Dimension
115mmX140mmX40mm
Net Weight
0.26KG
Power
Supply
2x AAA 1.5V alkaline
batteries or DC 9V 160mA
>=25hrs
Receiver Base
Working
hours
350mmX260mmX85mm
1.5KG
Indoor:
20M
Outdoor 60M
:
SPECIFICATIONS
Gross
Weight
Working
hours
The V2GO Dyna-Mic.01 may cause disturbance of wireless signals
in some locations. Neither V2GO Technologies, Inc, nor its dealer
network can guarantee wireless microphone systems will not
produce interference with radio, television or wireless telephone
systems. If interference is apparent, the following tips may reduce
interference:
ELECTRONIC INTERFERENCE ISSUES:
ELECTRONIC INTERFERENCE ISSUES:
1. Reset the system by turning power off on all components for 30
seconds and then repower the system.
2. Reposition the microphone and receiver further from other
electronic devices such as televisions and radios.
3. Contact the manufacturer of the device being interfered with for
technical support.