![background image](http://html.mh-extra.com/html/tait/tmaa10-07/tmaa10-07_installation-instructions_814066001.webp)
402-00035-00
www.taitworld.com
Tait
accessories
TMAA10-07
Desktop Microphone
Installation Instructions
Introduction
The TMAA10-07 desktop microphone is
an omnidirectional dynamic microphone
which can be used in dispatch situations,
where the microphone is positioned on a
flat surface. The desktop microphone
plugs into the microphone socket on the
radio control head.
The desktop microphone has an internal
pre-amplifier and an adjustable output
control on the underside of the desktop
microphone base.
Operation
Hold down the
MONITOR
key and check
whether the channel is clear.
If the channel is clear, press the
TRANSMIT
key (PTT) to transmit. Speak clearly into
the microphone and release the
TRANSMIT
key when you have finished talking.
Note:
The
MONITOR
key can be locked in the ‘on’ position. To do this, hold the
MONITOR
key down and slide the
LOCK
key towards you. The
MONITOR
key
should now be locked on.
Installation
Important:
The desktop microphone grommet must be installed whenever the
desktop microphone is plugged into the microphone socket. When installed,
the grommet has two functions:
■
to prevent damage to the microphone socket when there is movement of the
microphone cord, and
■
to ensure that the control head is sealed against water, dust and other
environmental hazards.
TRANSMIT
key
grommet
TRANSMIT
MONITOR
LOCK
key
MONITOR
key