ENGLISH
- 22 -
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
Press the
+
key,
the display shows
2
Press the
+
key,
the display shows
6
Press the
+
key,
the display shows
3
Press the
key:
2
flashes
Press the
key:
0
flashes
to indicate that the
function is deactivated
Press the
key:
3
flashes - the door opens
Press and hold the
+
(the door opens)
or
-
(the door closes)
key to reach the fully
close position
Press the
+
key to activate
the function: the display
shows
I
When the door stops, press
the
key to confirm.
Press the
key once
more to continue - the
door closes
When the door reaches the
closed position press the
key to save the settings
Press the
key to save
the settings.
The display shows
6
When the door stops, press
the
key to save the
settings.
The display shows
3
9.2 - SETTING THE CLOSE LIMIT SWITCH
9.4 - OPEN ALARM (DEFAULT: 0 – FUNCTION DEACTIVATED)
If this function is activated, the device emits BEEPs for 30 seconds when the door remains open for longer than 10 minutes. The alarm is
repeated every 10 minutes. Close to door to interrupt the alarm.
9.3 - SELF LEARNING OF THE FORCES
m
PLEASE NOTE: On completion of the procedure, it is
possible to exit the programming procedure, storing the
parameters set: press and hold the
key for 5 seconds
until the segments of the display illuminate one at a time
until showing
0
Summary of Contents for AZIMUT
Page 2: ...105 mm 310 mm 170 mm...
Page 87: ......
