![background image](http://html1.mh-extra.com/html/v-zug/supremo-xsl/supremo-xsl_operating-instructions-manual_3095236045.webp)
9 Trouble-shooting
Displayed message
Possible cause
Solution
Replace water filter. Press
to start
▪
The water softener fil-
ter is exhausted.
▸ Touch to replace the water
softener filter immediately
(see page 28).
Or:
▸ Touch to replace the water
softener filter later (see page
28).
General alarm: See in-
structions
▪
The inside of the ap-
pliance is very dirty.
▸ Clean the inside of the appli-
ance (see page 34).
▪
If message appears
again:
▸ Call Customer Services.
▪
The appliance is
scaled up.
▪
The water softener fil-
ter is exhausted.
▸ Descale the appliance (see
page 38).
▸ Replace (see page 18) or re-
move (see page 19) the wa-
ter softener filter.
▪
The appliance is
scaled up.
▸ Descale the appliance (see
page 38).
▪
The water softener fil-
ter is exhausted.
▸ Replace (see page 18) or re-
move (see page 19) the wa-
ter softener filter.
▪
The milk tube and
milk spout of the milk
frother are clogged or
dirty.
▸ Turn the adjusting knob of the
milk frother to position
.
▪
The auto-start user
setting is enabled.
▸ To disable auto-start, follow
the instructions in the «Cus-
tomising user settings» sec-
tion (see page 27).
▪
The energy saving
mode user setting is
enabled.
▸ To disable the energy saving
mode, follow the instructions
in the «Customising user set-
tings» section (see page 27).
▪
The user setting for
the water softener fil-
ter is enabled.
▸ To remove the water softener
filter, follow the instructions in
the «Permanently removing
the water softener filter» (see
page 19).
45