![background image](http://html1.mh-extra.com/html/v-zug/supremo-xsl/supremo-xsl_operating-instructions-manual_3095236032.webp)
8 Care and maintenance
8.2
Cleaning the internal circuit
Danger of burns!
Do not leave the appliance unattended while hot water is being delivered!
▸ If the appliance is switched off: Switch the appliance
on (see page 14).
▸ Place the receptacle under coffee spout
1
.
▸ Touch .
–
The main user settings menu appears in the dis-
play.
▸ Touch or repeatedly until rinsing
appears in the
display.
▸ Touch .
–
The rinse cycle starts.
–
In the display appears: «Rinsing underway – Hot
water from spouts».
–
Hot water comes out of the coffee spout
1
.
–
A bar in the display gradually fills in as the process
progresses.
▸ To end the rinse cycle before time, touch .
–
The start screen appears in the display.
1
▸ Repeat the rinse cycle.
If the appliance is not used for more than 3 days, at least 2 rinse cycles must be
performed before it is used again.
8.3
Cleaning the grounds container
Danger of clogging up!
When the following appears in the display: «Empty grounds container», it indicates
that the grounds container must be emptied and cleaned. Otherwise the next time
a coffee is made the grounds container may become overfull and clog up the ap-
pliance.
Can only be cleaned when the appliance is switched on.
Incorrect handling can result in damage to the appliance!
Do not clean the drip tray in the dishwasher.
▸ Open the service door
1
.
▸ Remove the drip tray
2
, grounds container
3
and drip
plate
4
.
▸ Empty the drip tray
2
and grounds container
3
, care-
fully removing all residues with the spatula part of the
brush.
▸ Rinse the drip tray
2
, grounds container
3
and drip
plate
4
with hot water and then put them back.
▸ Close the service door
1
.
1
2 3
4
32