![background image](http://html1.mh-extra.com/html/v-zug/gk17tiysz/gk17tiysz_installation-instructions-manual_3097279004.webp)
Installation instructions
Built-in variants
Teppan Yaki
GK17TIYSZ, GK27TIYSZ
1014839-R03
21/11/2017
1014839-R03
4
Surface-mounted installation
The cooking zone layout of the hob to be fitted may differ from the hob illustrated!
600
≥3
00
600/
50
0
490±1
≥50
≥50
A
On both sides
for technical reasons
560±
1
Ra
≥50
600
60
0/550
490±1
≥50
≥300
≥400
373
±1
384
501
Ra
Ri
GK17TIYSZ
Y
Y
H
On both sides
for technical reasons
Ri
50
1
57
1
GK27TIYSZ
Y
Y
H
H
≥10
*
Y – Y
B
Drawer/Cabinet
Side panel
* The required clearance must be observed!
Type
A Depends on producer
B
H
Corner radius Ra/Ri
GK17TIYSZ, GK27TIYSZ
≥30 mm
≥77.6 mm
64 mm
0–5/1.5 mm
A
Worktop depth (in combination with directly built-under oven; does not apply to small appliances)
B
Required clearance for service replacement
H
Dimension from the top of the work surface to the underside of the hob (ventilation opening)
Ri
Corner radii of appliance
Ra
Outer corner radii of cut-out
Installation
Do not damage the sealing bead.
The sealing bead must lie all around the edge of worktop.
▸
Create an accurate installation cut-out.
▸
Carefully put the appliance in the installation cut-out and press against the worktop with sufficient overlap.
Combination installation
For surface-mounted combination installation, the side strip set 1028587 and the intermediate support 1014361 (stainless steel) or
1019199 (black) is needed.
▸
The side strips must be fixed on the left-hand and right-hand side of the appliance with four screws on each side.
Surface-mounted combination installation is described in document 1013773.