background image

Installation instructions

Built-in variants
Teppan Yaki
GK17TIYSZ, GK27TIYSZ

1014839-R03

21/11/2017

1014839-R03

7

Changes to the service menu

Changes to the service menu can only be made within 1 minute of applying the voltage. If the appliance has already been connected
for a longer period, interrupt the power supply for about 10 seconds.

With the hob switched off, hold the 

 and   buttons depressed at the same time for 4 seconds.

An acoustic signal is emitted.

Hold both sliders 

 to the left of the   button depressed at the same time for 4 seconds.

An acoustic signal is emitted.

Use the 

 button to select the next highest and the   button the next lowest user setting.

The current service menu item is shown in the timer display.

The current value under the corresponding menu item is displayed above the first active slide to the left of the   button. Use the first
active slider to the left of the   button to change the values. The left half of the slider functions as the minus button and the right half
functions as the plus button.

Menu item

Function

Default setting

Setting

Description

Appliance configuration

Default setting

Software version number 

of touch control

The current software version 

is displayed: U-x-x-x.

Software variant number 

of touch control

The current software variant 

is displayed: P-x-x-x.

Display text

All displays illuminate.

Demo mode

The demo mode is switched off.

The demo mode is switched on.

To save entries: Hold the 

 and   buttons depressed at the same time for 2 seconds.

An acoustic signal is emitted.

The «Service menu» mode is ended.

Cancelling user settings

Press the   button.

Any changes made to the default values are not saved.

The «Service menu» mode is ended.

Summary of Contents for GK17TIYSZ








Reviews: