![background image](http://html1.mh-extra.com/html/v-zug/dwvhr9/dwvhr9_operating-instructions-manual_846903013.webp)
4 Care and maintenance
4
Care and maintenance
4.1
Cleaning the housing
Take care that no water gets into the housing of the appliance! If water gets into
the housing, it can cause damage. Do not use abrasive cleaners, scouring pads,
steel wool, etc. for cleaning, as they can damage the surface. Remove the screw
fuse or switch off the circuit breaker.
Cleaning the outside/inside
▸ Depress the
button for five seconds.
–
Wipe protection is activated, all the buttons flash on once and then flash from left to
right.
▸ Clean the outside using a slightly damp cloth – and detergent if necessary – and wipe
dry.
Grease and condensate water can build up on the inside next to the grease filters.
▸ Clean using a slightly damp cloth – and detergent if necessary – and wipe dry.
▸ After cleaning, depress the
button for five seconds.
–
Wipe protection is deactivated.
4.2
Metal grease filters
The filter can be cleaned.
Removing the upper grease filter
▸ Swing the glass panel
1
up.
▸ Press the grip
2
upwards, swing the
grease filter
3
forwards and remove from
the bracket
4
.
1
3
2
4
5
Removing the lower grease filter
Push the grip
6
towards the middle and re-
move the filter
5
.
6
5
Be careful not to damage the filter.
13
Summary of Contents for DWVHR9
Page 1: ...Operating instructions DWVHR9 Range hood ...
Page 22: ...22 10 Notes ...