5 Using the appliance
–
Any running operating mode or application will remain active.
▸ To close the message, select .
If, however, the water tank needs to be refilled:
▸ Fill the water tank with a maximum of 0.5 l of water as otherwise water could spill over
at the end of operation.
5.2
Selecting and starting the operating mode
▸ If the appliance is switched off: first press the adjusting knob.
▸ If the appliance is in another menu: press the
touch button.
–
The selection of operating modes appears in the display.
▸ Select the operating mode.
–
The operating mode settings appear in the display; a recommended value appears
above the temperature.
▸ Set the values for duration, end time and temperature or temperature level as required
and confirm.
Press and go
Once all the necessary settings for the operating mode have been made, a bar appears
in the display and counts down 20 seconds. If no further settings are made during this
time, operation starts automatically. If a setting is changed, Press and go starts again.
The duration of Press and go can be adjusted (see page 36) or it can be deactiv-
ated in the user settings.
▸ To start operation immediately, i.e. without Press and go, select .
–
If set, the countdown to the time remaining appears in the display and in the digital
display.
The operating mode selected cannot be changed once it has started.
Display overview
곍6HWWHPSHUDWXUH
굴
굵
굶
K
3
1
2
4
6
5
1
Operating mode settings
2
Press and go
3
Operating mode with symbol
4
Current position of the adjusting knob /
selected setting
5
Set values / recommended values
6
Symbols for settings
5.3
Checking and changing the settings
▸ Select the symbol for the desired setting.
▸ To change the value, turn the adjusting knob to the right or left.
▸ Press the adjusting knob to confirm the setting.
–
The operating mode settings are displayed.
–
The changed value can be seen above the corresponding symbol.
The end time can only be changed during the first 60 seconds of
operation.
19
