V-ZUG AdoraWash V6000, Operating Instructions Manual

Page: 39 / 56

11 Trouble-shooting
Display Possible cause Solution
Hygiene recom-
mendation ▪ No wash cycle has
been carried out at a
temperature of at least
60 °C for a longer
period of time. ▸ With one of the next wash cycles
carry out a wash with at least 60° C.
Or:
▸ Run «Appliance hygiene» pro-
gramme without laundry (see page
25).
Inlet water very
cold:
Heating extended ▪ Inlet water is very cold.
Heating is extended. ▸ No action is necessary.
Too many items:
Heating extended ▪ The selected pro-
gramme is intended for
a smaller load. Heating
and possibly rinsing is
extended. ▸ Adjust load to the max. load size
(see page 16).
Large unbalanced
load:
Spin extended ▪ The appliance optimizes
the distribution of the
wash load to com-
pensate an unbalanced
load. The final spin is
extended. ▸ Wash large and small items together
to avoid large unbalanced loads.
11.2 Other possible problems
Problem Possible cause Solution
The washing has
not been spun or
has been spun in-
sufficiently. ▪ The spin speed is set
too low. ▸ Increase the spin speed for the next
wash cycle (see page 30).
▪ Too unbalanced a load
in the washing drum. ▸ Wash large and small items to-
gether.
▪ «Steam anti-crease»
was selected and the
appliance was not
standing level. ▸ Optimize appliance set-up according
to installation instructions.
The appliance vi-
brates heavily
when spinning. ▪ The transport lock has
not been removed. ▸ Remove transport lock.
▪ The feet of the appli-
ance are not properly
adjusted. ▸ Set appliance feet so that the appli-
ance stands level.
▪ The load could not be
optimally balanced in
the washing drum. ▸ Wash large and small items to-
gether.
39