V-ZUG AdoraWash V6000, Operating Instructions Manual

Page: 41 / 56

11 Trouble-shooting
Problem Possible cause Solution
The consumption
values for Eco-
Management dis-
played are too
high. ▪ The values can vary ac-
cording to programme,
load, additional func-
tions and user settings.
▪ System-related fluctu-
ations cannot be ruled
out.
▸ Observe the user settings and addi-
tional functions.
The programme
takes significantly
longer than indic-
ated. The programme times
given serve only as a
guide. The duration can be
extended by, for example,
the following factors: ▸ Further information can be found in
the section on «Consumption val-
ues» (see page 45).
▪ Inlet water is very cold.
Heating is extended. ▸ No action is necessary.
▪ Washing detergent
dosage is too high. ▸ Reduce the amount of washing de-
tergent used next time.
▸ Adjust detergent dosage to the wa-
ter hardness (see page 18).
▪ Too unbalanced a load
during the intermediate
spin. ▸ Follow the trouble-shooting solution
for error message A5 (see page 37).
▪
Flow of inlet water is
low. ▸ No action is necessary.
▪ There are deposits or
fluff build-ups in the
draining system or for-
eign body trap. ▸ Follow the trouble-shooting solution
for error message A2 (see page 37).
11.3 Unsatisfactory wash results
Result Possible cause Solution
White residue on
washing ▪ Despite intensive rins-
ing, badly soluble com-
pounds in the detergent
can be left on the wash-
ing. ▸ Shake out or brush the wash items.
▸ Wash the items again with just a little
washing detergent.
▸ Use a liquid detergent that does not
contain zeolites.
▸ Select the «Black garments» textile
programme.
41