V-ZUG Adora 55 SL Operating Instructions Manual Download Page 33

Page: 33 / 84

Operation

5.1

Preparing the appliance

Open the appliance door

➤

Pull the door handle forwards.

– Any programme that is running will be automatically

interrupted.

Before using for the first time

➤

Switch the power on.

➤

Turn the water tap on.

➤

Fill the salt reservoir with approximately 1.5 l water and 1 kg regeneration
salt.

➤

Wipe away any excess salt around the edge of the salt reservoir.

➤

Fill the rinse agent reservoir with rinse agent.

➤

Run the

programme without dishes to protect the appliance from

corrosion from any excess salt.

For hygiene reasons, regeneration salt is also recommended for use
with low water hardness and

detergents.

On initial use, the

refill indicator can remain illuminated for several

wash cycles.

will go out when the salt concentration in the reservoir is evenly

distributed (after approximately 10 wash cycles).

Summary of Contents for Adora 55 SL





















































































Search results

Summary of Contents for Adora 55 SL

Reviews:

Related manuals for Adora 55 SL

Brands by name

Popular brands

V-ZUG Adora 55 SL, Operating Instructions Manual

Search results

Summary of Contents for Adora 55 SL

Reviews:

Related manuals for Adora 55 SL

Brands by name

Popular brands