V-ZUG Adora 55 SL Operating Instructions Manual Download Page 25

Page: 25 / 84

4 User settings

4.5

«All in 1» detergent

The «All in 1» setting adapts the programme for use with detergent with
integrated salt and rinse agent function in an optimal way.

•

products can only be used up to a certain water hardness. If the

refill indicators illuminate, still refill with regeneration salt or rinse

agent.

• The duration of very short programmes is extended because

detergent

takes longer to dissolve.

Setting for «All in 1» detergent

➤

Hold the

button depressed for

5 seconds.

➤

Press the

button repeatedly until the

current setting appears in the display,
e.g.:

➤

To change, press the

button.

– The setting is accepted.

–

illuminates.

➤

Press the

button repeatedly until in the

display appears:

User settings

All in 1

OFF

All in 1

Configuration saved

Summary of Contents for Adora 55 SL





















































































Search results

Summary of Contents for Adora 55 SL

Reviews:

Related manuals for Adora 55 SL

Brands by name

Popular brands

V-ZUG Adora 55 SL, Operating Instructions Manual

Search results

Summary of Contents for Adora 55 SL

Reviews:

Related manuals for Adora 55 SL

Brands by name

Popular brands