V-ZUG Adora 55 SL, Operating Instructions Manual, Page: 28 / 84

4 User settings
28
4.8 Water hardness
The built-in water softener removes limescale from the water, enabling
problem-free cleaning. Automatic regeneration occurs at regular intervals,
thus guaranteeing its effectiveness. Your appliance is equipped with an
automatic limescale sensor. Configuring the level of water hardness is
therefore not necessary. The appliance automatically starts the regeneration
process at the right time. After regeneration, the next programme starts by
rinsing out the water softener by pumping water through it and draining
simultaneously.
For hygiene reasons, regeneration salt is also recommended for use with low
water hardness and
detergents.
Setting the water hardness unit
The unit of water hardness can be set to the French measure of water
hardness (°fH) or the German measure of water hardness (°dH).
For information on the level of water hardness in your area, visit
www.wasserqualitaet.ch or contact your local water authority.
➤
Hold the button depressed for
5 seconds.
➤
Press the button repeatedly until the
current setting appears in the display,
e.g.:
➤
To change, press the button.
– The setting is accepted.
➤
Press the button repeatedly until in the
display appears:
User settings
Water hardness unit ˚fH
Water hardness unit ˚dH
Configuration saved