4 User settings
30
4.9
Hot water connection
The available hot water is used optimally. If the water intake is still too cold,
a short pre-rinse is carried out. The cleaning phase with hot water follows.
When the additional energy saving function is selected, the water is heated
up further electrically only to a minimum temperature, reducing energy
consumption further.
Setting the hot water connection
«NO HEATING» setting
The water is not heated up further by the integrated heating element. For this
reason, this setting should only be selected if a water inlet temperature of
60 °C is ensured. Satisfactory cleaning and drying results are not guaranteed
at a lower temperature.
➤
Hold the
button depressed for
5 seconds.
➤
Press the
button repeatedly until the
current setting appears in the display,
e.g.:
➤
To change, press the
button.
– The setting is accepted.
➤
Press the
button repeatedly until in the
display appears:
User settings
Hot water
NO
Hot water
YES
Configuration saved
Summary of Contents for Adora 55 SL
