6
OPERATING INSTRUCTIONS
WARNING
To reduce the risk of electric shock, the power cord must be
disconnected before removing the dust bag, cloth bag,
changing the filters or performing maintenance or trouble –
Shooting checks.
ASSEMBLING YOUR VACUUM
Note. Always remove the power plug from the wall outlet
before assembling or removing accessories.
INSERTING THE DUST BAG
Note. This unit can be used with the Shake-Out Bag alone, however it
must be cleaned after every use if there is
no
Dust Bag installed.
Important. Do not use the vacuum with out all filters, cloth bag, and with
or without Dust Bag in place.
1. Unplug the hose connecting power cord and remove the flexible hose.
2. To open the canister lid press on the canister lid tabs on each side of the
unit and lift canister lid. (Fig.1)
3. Pull the tab on the Dust Bag holder out slightly and flip upwards. (Fig.2)
4. Holding the Dust Bag in your hand, slice it firmly between the slots
in the bag holder. (Fig.2)
5. The cardboard face of the new bag should rest securely in the
Dust Bag cover guides. (Fig.3)
6. Ensure that the Shake-Out Bag is in place. (Fig.4)
7. Flip the dustbag holder over, pressing the tab on the bag holder until it
clicks, then replace the canister lid.
8. The canister lid can be replaced on the unit with the hose opening
on the right or left, as per your preference. (Fig.5)
ATTACHING THE FLEXIBLE HOSE TO THE VACUUM
The flexible hose should be connected to the vacuum before strapping the unit.
1. To connect the flexible hose into the hose inlet, insert the threaded end of the
flexible hose into the hose inlet and turn counter-clockwise until it locks into
place. (Fig.6)
2. Plug the power cord into the electrical outlet.
