6
Prior to use, please carefully read the instructions, paying particular attention to
"IMPORTANT RECOMMENDATIONS", "SECURITY NORMS" and "PRECAUTIONS".
It is forbidden to remove or tamper with the protective parts of the machine.
It is forbidden to use inflammable, explosive or toxic substances.
It is obligatory to use appropriate protective equipment.
It is obligatory to keep the machine clean and in good working order, in particular the controls, the
connections and the technical data panel.
For your safety, and that of those around you, and for the continued working of the machine, do not use
parts other than those prescribed by the constructor.
Before using the high pressure cleaner, always try to ensure that any potential hazardous conditions have
been removed or eliminated from the area of usage.
The high pressure cleaner should be used with clean water. Unfiltered water and/or corrosive chemicals will
cause damage to the machine.
IMPORTANT RECOMMENDATIONS
The ordinary use of this machine does not require particularly specialised training, as long as the user has
sufficient competence and training to carry it out, knowledge of this manual and is aware of general safety
procedures.
Follow the instructions with great care for your safety and that of others, to safeguard your machine and
protect the environment.
SECURITY NORMS
FOUR SYMBOLS TO REMEMBER
Your machine is supplied with
electronic apparatus, the use of
which requires the observation of
the following safety criteria.
When using the machine
outdoors, do not use
when it is raining
Take great care not to
damage
the
electrical
power supply lead, in case
in
spite
of
taking
precautions the cable is
damaged do not attempt
a precarious repair. A new
cable costs much less
than having to repair the
machine
due
to
an
eventual power fault, let
alone
the
danger
a
defective cable could pose
for people and animals.
Do not attempt any kind
of maintenance whilst the
plug is connected to any
sort of power supply.
Take care not to spray the
machine with the water
jet as this could lead to
short-circuit
Should you need to use
an extension lead with the
power supply, make sure
that
the
connection
between the extension
General danger
Ranger of severe damage to the machine
Danger to people
Safeguarding the environment
Summary of Contents for RAPID-VSC
