V-Trak Backrest, User Manual, Page: 20 / 32

V-Trak Lite Hardware installation
Adjusting for different wheelchair widths:
1. Proceed as for Seat Depth
adjustment but rotate the Mounting
Blocks equally to achieve the
desired width.
2. Secure in position by tightening all
fixingscrews and closing the Locking
Levers. See 14, 15, 16 .
Removing the Backrest:
1. Raise the Locking Levers at each side, past
the vertical position to the
Unlocked
position.
2. With a hand under each side of the
hardware, lift evenly upwards and clear of
the Mounting Blocks
Replacing the Backrest:
1. Ensure both Locking Levers are in the
Unlocked position.
2. With a hand under each end of the system,
lower the Locking pins evenly into the Mounting
Blocks on the wheelchair.
3. When both Locking Pins are located in the
holes in the Mounting Blocks, push down firmly.
Ensure that the Locking Pins are fully located
before pressing the Locking Levers downwards
until fully horizontal, in the Locked position. The
system is now firmly attached to the wheelchair.
.
14 15
16