5. Load the magnetic track lights into the track
then switch on the power to test the light (Fig 15).
Dimension spacing table of hole for recessed
(without wings)magnetic track
Track installation - Hole position marking diagram
2. Before installating please refer to the table
for track cut out size, installation & marking
position (Fig 12).
1. Before you install the recessed track, please refer to the hole position mapping diagram(Fig11),
dimension spacing table of the recessed fixing parts and track cut out size in the installation area.
3. Insert the recessed accessories into the measur-
ing position on the back of the open ceiling. Fix the
fittings with self-tapping screws and check whether
the fittings are installed correctly. Ensure the track
is firmly installed (Fig 13).
4. Install the track into the ceiling, and fix the
track to the fitting using M7 screws. Ensure the
screws are properly installed (Fig 14).
RECESSED TRACK (WITHOUT WINGS) INSTALLATION
RECESSED ACCESSORY DESCRIPTION:
1. The accessory is mounted on the back of the ceiling board.
2. The thickness of the board should be 8-12mm.
Installation of recessed kit (without
wings) track only. Installation and Fixed
use black.
Recessed Kit
FIG 11
FIG 12
FIG 13
FIG 14
FIG 15
Accessories required for recessed track(without wings) installation:
1.
2.
NO
NAME
SKU
7970
PICTURE
SIZE
DESCRIPTION
For track installation and fixed use.
4x30mm Tapping
Screw
4x30mm
D
SKU/Length
7950 / 0.5M
7951 / 1M
7953 / 1.5M
7952 / 2M
2
ENGLISH
ENGLISH
