ENGLISH
ENGLISH
2
1.Please refer to the track installation diagram for the hole positions(fig 1). And refer to the table
below for dimension spacing of the holes for surface magnetic track.
2. Mark hole position and drill holes with tools in
the track installation area. Make sure to drill
outlet holes for power cables (Ref Fig 2).
3. Install the track into the ceiling with self-tap-
ping screws and the power cord enters through
the hole of the track outlet. Ensure the screw is
firmly installed with the track (Ref Fig 3).
5. Load the magnetic track lights into the track
then switch on the power to test the light.
4. Connect the power cables from the track to
the track power connector box, and push the
excess cables into the ceiling from the outlet
hole. Please refer to the installation instructions
of the
External power supply installation
for
wiring connections.
Dimension spacing table of the holes fo surface
magnetic track:
SURFACE MOUNTED MAGNETIC TRACK INSTALLATION
FIG 1
FIG 2
FIG 3
FIG 4
FIG 5
Accessories required for surface mounted magnetic track installation:
1.
NO
NAME
PICTURE
SIZE
DESCRIPTION
For track installation and fixed use
4x30mm Tapping
Screw
4x30mm
D
SKU/Length
7950 / 0.5M
7951 / 1M
7953 / 1.5M
7952 / 2M
2
ENGLISH
ENGLISH
