REV. 00
CHAP. 7
PAG.
30/36
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
FIFTH WHEEL Rp10
11b
2c
7
8
19c
2a
2a
2b
1)
2)
3)
4) Position the fifth wheel plate (8) as shown in the illustration on page 31/36
then proceed with the operations necessary for fifth wheel plate (8) release
from its supports, as per directions given at section 7.1 - FIFTH WHEEL
BEARINGS REPLACEMENT - page 27/36;
Remove the two contrast ring screws (2a) to release the contrast ring (2c);
Remove the worn contrast ring (2c). Dispose as specified in section 9 -
DISPOSAL -page 34/36;
Turn out the screw (2a) to remove the pin (2b);
Please make sure that the jaw (7) and the wedge (11b) are clearly visible
and check to see that the operating handle (19c) is well lodged into its
slot.
This chapter refers to the figures on pages 30-32/36.
Read the following instructions carefully before any operation:
7.2 REPLACEMENT OF THE JAW LOCK MECHANISM
Summary of Contents for RP10
Page 36: ...NOTES NOTES ...
