V.ORLANDI RP10, Installation, Operating And Maintenance Instructions For The Installer And The User, Page: 28 / 36

REV. 00
CHAP. 7
PAG.
28/36
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
FIFTH WHEEL Rp10
N
O
T
E
3a
25
26
3)
4)
5)
6)
7)
8)
Position in the new upper rubber bearing (29) making
sure that the arrow marker points
towards the front end of the tractor unit;
Lift the fifth wheel plate (8) using appropriate lifting devices for 150 kg
weights;
Rest the fifth wheel plate (8) back onto the
Pedestal (30);
Lock everything back on
using four screws (3a),
washers (25) and nuts (26);
Torque wrench setting 270-300 Nm.
Warning! Limb injury hazards!
Make sure that the fifth wheel plate (8) is safely anchored and secure for
extraction of the upper rubber bearing (29) . Dispose as specified in section
9 - DISPOSAL - page 34/36;
Each time the rubber bearings are replaced
all the screws (3a) the washers (25) and
the nuts (26) must be replaced. Dispose as
specified in section 9 - DISPOSAL - page 34/36.
8
29
27
28
30
Lodge in the new lower rubber
bearing (28) making sure that the
arrow marker points towards the front
end of the tractor unit and the fixing
plate (27);