REV. F
CHAP. 2
PAG.
11/32
Insert the split pin (2) through the castellated nut and the hole on the thread of
the tie rod (9). Open the two halves of the split pin and press them back against
the castellated nut;
Fit the nut cover (1).
Never slacken the castellated nut back to allow the split pin to be
inserted. If necessary, tighten the castellated nut further until one of the
holes in the shaft aligne with one of the castellations in the nut.
6)
7)
Tighten the castellated nut (3) with a torque wrench as follows:
Coupling Torque
5)
E 503
E 504
E 505
E 506
E 509
E 510
M=350 -
M=500 -
M=500 -
M=500 -
M=550 -
M=600 -
430 Nm
611 Nm
611 Nm
611 Nm
700 Nm
750 Nm
N
O
T
E
DRAWBAR COUPLING E 50
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
E 509
E 506-E 510
E 509
E 506-E 510
