Version 16.01.2018
HW:25-GD (V101)
CI-VL3-R40
P
a
g
e
9
2.3.
Connections to the head-unit
2.3.1.
Installation of the Exchange – retaining plate and the daughter PCB
Remove the head-unit and further remove the
original housing cover plate, which is fixed to the
head-unit housing by 5 Torx screws (T9).
Turn out the 4 screws of the monitor retaining
plate, after carefully unklipping the 66pin and
the 9pin ribbon cables.
Note: The connected ribbon cables have to be
handled with care to avoid each damage of the
sensitive electrical inducters (Refer also to
chapter “Connecting the ribbon cables”)
Remove the Original monitor retaining plate and replace it with the exchange
retaining-plate by using the original screws.
