Version 16.01.2018
HW:25-GD (V101)
CI-VL3-R40
P
a
g
e
6
1.4.1.
Enabling the interface’s video inputs (dip 2-3)
Only the enabled video inputs can be accessed when switching through the interface’s video
sources. It`s recommended to enable only the required inputs for the disabled will be
skipped when switching through the video-interfaces inputs.
1.4.2.
Rear-view camera setting (dip 5)
If set to OFF, the interface switches to factory LVDS picture while the reverse gear is engaged
to display factory rear-view camera or factory optical park system picture.
If set to ON, the interface switches to its rear-view camera input “Camera-IN” while the
reverse gear is engaged.
Note:
Dip 1, 4, 6, 7 and 8 are out of function and have to be set to
OFF
.
1.5.
Settings of the 4 Dip switches (CAN function - red)
Dip position down is
ON
and position up is
OFF
.
Navigation / Sy5tem
Dip 1
Dip 2
Dip 3
Dip 4
R4.0 IntelliLink systems
OFF
OFF
OFF
OFF
Set all 4 dips to OFF.
After each Dip-switch-change a power-reset of the Can-box has to be performed!
