Version 16.01.2018
HW:25-GD (V101)
CI-VL3-R40
P
a
g
e
14
2.6.
Connecting the video sources
It is possible to connect two after-market video-sources and an after-market rear-view
camera to the video-interface.
Before the final installation, we recommend a test-run of the interface. Due to changes in
the production of the vehicle manufacturer, there’s always the possibility of
incompatibility.
2.6.1.
Video-sources to Video IN1 and Video IN2
Connect the interface cable’s female 12pin connector to the interface’s male 12pin
connector.
Connect the video RCA of the video-source 1 to the female RCA connector “Video IN1”
of the video cable.
Connect the video RCA of the video-source 2 to the female RCA connector “Video-IN2”
of the video cable.
