Version 23.02.2018
HW:25 (V92)
CI-VL2-CONCERT
P
a
g
e
8
2.3.
Connecting video-interface and CAN-box
Connect the black female 6pin Micro-Fit connector of the PNP Power/CAN harness to
the male 6pin Micro-Fit connector of the CAN-box.
Note:
Check the LEDs on CAN-box after reconnecting the battery, two must be on.
Connect the white female 6pin Molex connector of the 6pin to 8pin cable to the male
6pin Molex connector of the video-interface.
Connect the black female 8pin Micro-Fit connector of the 6pin to 8pin cable to male
8pin Micro-Fit connector of the CAN-box.
Connect the female 8pin connector of the communication cable to the male 8pin
connector of the interface.
Note:
Check the LEDs on the video-interface after reconnecting the battery, one must
be on.
Note: No liability for vehicle wire colours and pin definition!
Changes by the vehicle manufacturer are possible. The given information has to be verified
by the installer.
