Version 23.02.2018
HW:25 (V92)
CI-VL2-CONCERT
P
a
g
e
15
2.5.4.
After-market rear-view camera
Some vehicles have a different reverse gear code on the CAN-bus which the included CAN-
box is not compatible with. In this case there are two different ways of installation. If the
CAN-box is able to detect an enabled vehicle’s reverse gear, the green wire of the 6pin to
8pin cable should carry +12V while the reverse gear is engaged.
Note:
Do not forget to set dip5 of video-interface to ON before testing.
2.5.4.1.
Case 1: CAN-box receives the reverse gear signal
If the CAN-bus box de12V on the green wire of the 6pin to 8pin cable while reverse
gear is engaged, the video interface will automatically switch to the rear-view camera input
CAM while the reverse gear is engaged.
Additionally, for the camera`s +12V Power supply the green wire of the 6pin to 8pin wire can
be used.
Strip a little part from the green wire of the 6pin to 8pin cable and connect it to the
Power cable of the after-market rear-view camera
