VG-6132 Gas Extinguishing Panel
3
Fig. 3-3
Critical status of VG-6132 Gas Extinguishing Panel are indicated by LEDs, description is shown as below.
Main control section
◇
Power
（
Green
）
：
It turns on when the main power is supplied and turns off when the power is low
voltage or the power cable is broken.
◇
Battery
（
Green
）
：
It turns on when the battery power is working normally, and turns off when the
battery power is low voltage or the power cable is broken.
◇
Silence
（
Green
）
：
The LED turns on when the Silence key is pressed.Reserve
（
Amber
）
：
LED Reserve
for other usage.
◇
Power Fault
（
Amber
）
：
It turns on when the main power is low voltage or the cable is broken, and turns
off when the main power is working normally.
◇
Batt Fault
（
Amber
）
：
It turns on when the standby power is low voltage or the cable is broken and turns
off when the standby power is working normally.
◇
COM Fault
（
Amber
）
：
It runs on when there is any fault occurred on the control panel and turns off when
all faults are removed.
◇
SYS Inspect
（
Amber
）
：
It turns on when the panel is under self-testing.
◇
Manual
（
Red
）
：
It turns on when Manual/Auto lock is set to manual.
◇
Auto
（
Red
）
：
It turns on when Manual/Auto lock is set to auto.
◇
Standby
（
Red
）
：
It turns on when Override lock is closed.
◇
Override
（
Red
）
：
It turns on when Override lock is opened.
Fire Protection Zone Section
◇
Pre-alarm
（
Red
）
：
It turns on when there is fire and turns off automatically if there is no fire alarm within
30 minutes.
◇
Fire
（
Red
）
：
It turns on when there is fire and turns off automatically if there is no alert signal within 30
minutes.
◇
Activate
（
Red
）
：
In AUTO mode, LED turns on when the panel activates the action outputs.
◇
Sounder
（
Red
）
：
It turns on when the sounder strobe is activated and turns off when the sounder strobe is
off.
◇
Delay
（
Red
）
：
It turns on when the panel is in delay mode.
◇
Discharge
（
Red
）
：
It turns on when the control panel activates the cylinder valve.
◇
Response
（
Red
）：
It turns on when the panel receiving feedback from solenoid valve, and LED
illuminates until reset.
◇
Start
（
Red
）
：
It turns on when the Start button is pressed and turns off whenthe Abort button is pressed.
◇
Abort
（
Red
）
：
It turns on when the Abort button is pressed and turns off after reset.
