Assembly
Page 22
Abdominus Tummy Trimmer
5
Connect the free end of each of the Frame Link Plates (13) to the left
and right sides of the assembled Handrail Frame. First loosen or
remove the 2 x M6 Plastic Locking Knobs (22) to allow initial fitment
of the Frame Link Plates and then re-fit or re-tighten the Locking
Knobs, ensuring that the cut-outs in each Link Plate fits over the
brass insert in the Plastic Locking Knob.
Note
Securely tighten both Plastic
Locking Knobs to ensure stability
of the frame in use.
13
22
Open the Exercise Monitor (14) by pressing the side tabs in the case.
Install the single “AAA” Battery supplied with the Exercise Monitor
ensuring that you check the polarity first. Place the 2 parts of the
Exercise Monitor case around the exposed area on the Handrail
Frame and with the Exercise Monitor screen facing down towards
your intended line of vision when using the Abdominus Tummy
Trimmer, snap the assembly together.
Note
To ensure that the Exercise
Monitor operates correctly,
please ensure, when you are
positioned in the Abdominus
Tummy Trimmer frame that the
screen on the Exercise Monitor
is directly in your line of vision.
6
11
14
View from Underside
Note
There are NO screws to fit the 2
parts of the case together,
simply push both shells together
firmly.
This Exercise Monitor is fitted with a small, sealed mercury operated
counter, which enables the Exercise Monitor to register the number of
repetitions made during use and the exercise duration and will only
operate when positioned in this manner.
abdominus.qxp 30/4/02 4:38 pm Page 22
Summary of Contents for GE1
Page 1: ...Assembly User Manual Abdominus Tummy Trimmer GE1...
Page 2: ......
