Assembly
Fit the Handlebar (3) onto the bracket of the Handlebar Upright (2) and secure
in place using the Handlebar Plastic Cover (44), Spacer (45), 1 x M8 Flat Washer
(21) and Handlebar "T" Knob (46). Align the handlebar into a comfortable position
and tighten the Handlebar "T" Knob (46) securely.
4
Note
For safety during use do NOT
lean your full bodyweight onto
the Handlebar. Please regularly
check the security of the
Handlebar bolts.
44
3
2
45 21
46
3
5
21
22
23
18
1
Remove the 3 x M8 Nylon Locknuts (22) and 3 x M8 Flat Washers (21) from
the underside of the Saddle (5). Attach the Saddle (5) to the Saddle Stem (23)
then loosely refit the 3 x M8 Flat Washers (21) and 3 x M8 Nylon Locknuts (22).
Slide the assembled Saddle Stem (23) into the Main Frame (1), select the desired
height to allow for a slight knee bend at the bottom of the pedaling action and secure
in place with the Saddle Adjustment Knob (18). Align the Saddle and tighten the
3 x M8 Nylon Locknuts (22) securely. Unlock the Saddle Adjustment Knob (18)
and change the saddle height if necessary. Do not exceed the “MAX” marking on tube.
Page 20
Summary of Contents for FC2790-UK
Page 2: ......
Page 22: ...Assembly Page 22 51...
