V-fit FC2790-UK, Assembly & User Manual

Page: 15 / 24

User Information
LUBRICATION and MAINTENANCE
In the interest of safety, do NOT
use polish or any lubricant on
the saddle, foam handgrips
or pedals.
Note
Page 15
The moving parts in your Cycle are all pre-lubricated at assembly and
should not require further attention. We recommend however that
the cycle is used inside and stored in a dry condition.
To clean the metal and plastic components, a general household cleaner
can be used, but please be sure to dry the cycle and any attachments
before use.
HOW TO FOLD
Undo the Saddle Adjustment Knob (18), lower the Saddle Stem (23)
to it's lowest position as per below drawing and refit the Saddle
Adjustment Knob (18).
Remove the M10 Locking Knob (53) from the front of the Handlebar
Upright (2).
Lower the Handlebar Upright (2) so that it is resting on the Saddle (5).
Replace the M10 locking Knob (53) into the Handlebar Upright (2).
Undo the Handlebar "T" Knob and lower the Handlebar (3) as per
below drawing.
18
23
53
3
2
5