Level monitoring system
NT 4600
Technical information / Instruction manual
page
Visualisation - Operation
User rights overview
Depending on the selected userlevel the follwing features are available:
Change of user rights
Select the userlevel to be changed to, enter the password and press "Change".
Factory provided the password for all levels is set to "0".
If the change was sucessful, the box changes its colour to green, otherwise to red.
If the password is forgotten, please contact the supplier.
Note: Level 3 und 4 are used for service reasons (not available).
Selection of user rights and password
Feature
Level 0 Level 1 Level 2
Overview page (Silo overview)
x
x
x
Silo single view
x
x
x
Horn reset (full detection)
x
x
x
Measurement start Nivobob
x
x
Page "Basic settings"
x
Page "Silo settings"
x
Page "Sensor settings"
x
Password change for Level 1 and 2
x
Password change
Factory provided the password for all levels is set to "0".
To change a password requires to be logged in Level 2, where the button "Edit password" appears. Press this button and select the level
for which the password shall be changed.
For Level 0 the password can not be changed, it remains "0".
For Level 1 and 2 the new password may be one-digit to six-digit.
If the password change was sucessful, the box changes its colour to green, otherwise to red.
Page "Basic settings - User"
Nivotec
®
1
2
3
4
5
6
7
8
9
10
11
12
NT 4600
gi010417
13
