Level monitoring system
NT 4600
Technical information / Instruction manual
page
Visualisation - Operation
Display of level, full detector, information regarding silo and error messages
User Level 0 or higher
The selected number of silos (as defined on page 14) is presented. If more than 3 silos are defined, a button appears for progression to
the next or previous page.
The level is stated according to the unit as selected under "unit level" (see page 16)
The colored points display the full detection as defined under "Full detector" (see page 17 - 18).
Overview page (Silo overview)
Silo Single View (pressing on a silo)
The single view for the respective silo will open (see page 12).
Basic settings
see page 13 to 15
START (all NB)
User Level 1 or 2.
Starts the measurement of all connected Nivobobs. If more than 3 silos are defined, the measurements of the silos not displayed on the
screen are started as well.
While the measurement is running, a green arrow appears in each silo.
In the top line the date and time of the last measurement is displayed.
Measurement start is not possible due to one of the following reasons:
Under "Sensor-settings" the selection"Sensor Nivobob" is not present (see page17).
The "Modbus for silo" is set to "inactiv" (see page 17).
Display "Blocked Start":
The Nivobob Measurement Start is set to "no" (see page 17).
Display "Blocked 24 - 26": The bridge between terminal 24 - 26 at the Nivobob ist open. See Nivobob user manual.
Horn reset
Reset of the full signal (horn). The button appears only, if the horn is activated.
Possible other messages:
"Offline":
The "Modbus for silo" is set to "inactiv", thus the respective silo has no valid measurement (see page 17).
"Modbus":
The Modbus network is not working. See items under commissioning (page 10).
Further diagnostic messages may appear. If so, the messages implement comments for reason and possible measures.
Nivotec
®
1
2
3
4
5
6
7
8
9
10
11
12
NT 4600
gi010417
11
