Nivobob
®
1
2
3
4
5
6
7
8
9
10
11
12
NB 3000
gi130109
35
Continuous level measuring system
NB 3000
Technical information / Instruction manual
page G
Quickset page
• Programming of:
Max. move distance M
Silo Height H
Air Distance A
Cone height
See page G24 for details.
Programming via keypad after pressing the touchscreen
at the spot, where the value is stated. Confim with
ENTER.
If the programmed values are out of range, the values
are first stated in the display, but then will be changed to
the max. possible values after a few seconds.
A flashing display indicates, that the NB 3000 is actually
been programmed on the silo.
Note: The 4-20mA output is automatically programmed
by setting these values.
• NEXT switches to Quickset page 2
• TIMER sets the timer for automatic starting (see page
G28)
• BLOCKED or ENABLED avoids or enables the start of
a measurement (measurement interruption)
• BACK switches to the Overview page per silo.
Diagnostics page
• Displays if a Failure or Maintenance message is
present. The respective box is highlighted and states
the Failure or Maintenance code. See page G37-39 for
details.
Note 1: In case of Failure or Maintenance, the level
display on the Home page and Overview page per silo
will flash.
Note 2: The messages cannot be reset from the Remote
Box, but must be reset on the silo, because an action on
site is required.
NEXT switches to Diagnostics page 2
• ROPE/TAPE CYCLES
see page G30
• MOTOR RUN TIME
see page G30
• BACK switches to the Overview page per silo.
Programming NB 9000 Remote Box
Max. mov. dist. M
Silo height H
Air dist. A
NEXT
24.5m
26.0m
1.0m
3.5m
Cone height C
BLOCKED
ENABLED
Timer
12.0h
BACK
Meas.
F10
F11
F12
F13
F15
F16
F17
M10 M11 M12 M16 M17
NEXT
Failure
Maint.
Rope/Tape Cycles
Motor Run time
Total
Left
Total
Left
BACK
45630
104370
1225h
1775h
