b. The tare effect will be cancelled:
-Automatically if automatic tare function is
employed, or
-By pressing
ON/RE-ZERO
c. After
ON/RE-ZERO
is pressed, the
TARE INDICATOR
would disappear
5.9 COUNTING FUNCTION
This scale equipped with simple counting function, with
the convenience in just a press away.
5.9.1 Sampling
Sampling function can be activated at anytime regardless
the weight unit that scale is currently engaging.
a. Remove everything off from the platter and press
SAMPLE SET
, display will show ¡
S=20
¡
b. Press
SAMPLE SET
again to select for more preset
sample counts (20, 50, 100, 200 PCS) until the desire
quantity is reached. The sample count selected will
remain on display for 6 seconds allowing user to
load the corresponding quantities on platter in
order for the scale to calculate the unit piece weight
NOTE:
If no weight is placed on the platter during sampling,
scale will return to normal operation after 6 seconds
c. When corresponding quantity is placed on the
platter, press
SAMPLE SET
to execute the average
function. Scale will automatically calculate the
unit piece weight and engage counting function. The
value shown in the display is in PCS and in indicator
will point at PCS sign on the overlay
d. The average unit piece weight is stored to cache
memory in the scale and will be erased upon a new
input has been executed or scale is turned off
e. Place any quantities on the scale, it will base on
the unit piece weight stored in the memory to
calculate and display the number of items place on
the platter
f. To count a different subject, remove everything from
platter and repeat the above steps from
a
to
d
5.10 RECHARGE THE SCALE
The scale is equipped with a built-in rechargeable
battery. When the
LO-BAT INDICATOR
appears, recharge
the scale immediately. Failure to do so may cause
unrecoverable damage to the rechargeable battery.
