NOTE
:
Weight Check Function will not valid when the weight
unit engaged (e.g. lb) is different from the original
weight unit programmed under (e.g. gram).
Weight Check Function will not valid when the weight
is less than minimum load.
Please refer to
SPECIFICATION
for minimum load of each capacity.
Weight Check Function will not valid when high and low
weight limits are not logical (e.g. value of high weight
limit is less than the value of the weight limit set).
To disable Weight Check Function, simply set the high
weight limit to zero or set the buzzer warning to
bb_no.
to turn off the warning.
5.8.2 Weight Check Transaction
Place a subject matter onto the platter. The Weight Check
result is displayed on the display.
a. The
HI INDICATOR
will appear when weight detected
over the high weight limit preset.
b. The
OK INDICATOR
will appear when weight detected
within the high upper and low weight limit.
c. The
LO INDICATOR
will appear when weight detected
under the low weight limit preset.
Summary of Contents for ADW-1500E
Page 1: ......
