g.
When the require high weight limit attained, press
and hold
ON/ZERO
, then press
TARE
h.
The
LO INDICATOR
appears and the cursor is flashing,
scale is now in lower weight limit setup
i.
Utilize
MODE
,
TARE
and
ON/ZERO
to set the required
low weight limit
j.
When the require low weight limit attained, press
and hold
ON/ZERO
, then press
TARE
k.
Scale displays buzzer warning parameter setup
l.
Press
MODE
until the desired buzzer output parameter
appears
NOTE:
-bb_L
. = buzzer warning when weight detected
below the low weight limit set.
-bb_no
= no buzzer warning.
-bb_S.
= buzzer warning when weight detected within
the high and low weight limit set.
-bb_H.L.
= buzzer warning when weight detected
below/above the low/high weight limit set.
-bb_H
. = buzzer warning when weight detected above
the high weight limit set.
m. When the require buzzer warning setting is selected,
press and hold
ON/ZERO
, then press
TARE
to return
to normal operation status
Summary of Contents for ADW-1500E
Page 1: ......
