Uwatec REBEL BC, Manual

Page: 16 / 420

16
OP Valve with a Pull
Dump: Cord is
cracked or removed
Improper
use, transport
or storage.
Wearing
down of com-
ponents
Buoyancy cannot
be guaranteed
during the dive
Potential rapid
ascension
Don’t start diving.
Have the BC check
by an authorized
Scubapro technician.
BC has cuts, punc
-
tures, frayed seams,
excessive abra-
sion, loose/missing
hardware and other
damage of any kind.
Improper
use, transport
or storage.
Wearing
down of com-
ponents
Not possible to
use. No guaran-
tee for a safe dive Don’t start diving.
Have the BC check
by an authorized
Scubapro technician.
Tightening of the
dump valves and
the elbow ring are
not sufficient
Improper as-
sembly or
l o o s e n e d
during trans-
port Potential to lose
parts during the
dive Don’t start diving.
Have the BC check
by an authorized
Scubapro technician.
Leakage from aircell”
after oral inflation
Cuts or
cracks
because of
improper
using, trans-
portation or
storage Not possible to
use. Potential
rapid descension Don’t start diving.
Have the BC check
by an authorized
Scubapro technician.
Super Chinch band
doesn’t work
Tankband
has not the
correct size
adjustment,
Not correct
assembled Tank slip out. Not
possible to dive. Don’t start diving.
Check the correct
tank size and change
it if needed. Note:
Check before the
maximum Volume of
the BC!
BC doesn’t fit comfort
-
able
Adjust straps
and other
attachments
on the BC are
not attached
correct
Possible restric-
tions of breathing
or possible los-
ing parts during
the dive Make sure all straps
and parts are on the
correct position,
before diving. Check
the correct size of
the BCD.
Weight pockets are
slipping out
Buckles or
zipper are
not working
or broken
because of
improper
using, trans-
portation or
storage No downforce
possible without
lead Check buckles and
zipper of weight
pockets if there
are any damages.
If not possible to
fix, don’t start div
-
ing. An authorized
Scubapro technician
have to check weight
pockets.