Uwatec Galileo 2, User Manual

Page: 90 / 96

90
GALILEO 2 (G2) USER MANUAL
Security code 313 will be required to
proceed with this operation.
WARNING
All data stored to flash will be erased. This
includes all dive logs. To prevent the loss of
your G2 data:
1. Keep a backup on your PC/Mac.
2. Download and store your dive logs with
LogTRAK.
6 .2 Technical information
Operating altitude:
with decompression – sea level to
approximately 4000m/13300ft.
without decompression (Gauge mode) –
at any altitude.
Max operating depth:
120m/394ft; resolution is 0.1m until
99.9m, and 1m at depth deeper than
100m. Resolution in feet is always 1ft.
Accuracy is within 2% ±0.2m/1ft.
Decompression calculation range:
0.8m to 120m / 3ft to 394ft.
Clock:
quartz clock, time, date, dive time display
up to 999 minutes.
Oxygen concentration:
adjustable between 8% and 100%.
Helium concentration:
adjustable between 0% and 92%.
Operating temperature:
-10C to +50C / 14F to 122F.
Power supply:
Li-Ion battery, user chargeable via USB.
Operation time with fully charged battery:
Up to 50h. Actual battery operation
time depends mainly on the operation
temperature and backlight settings, but
also many other factors.
6 .3 Maintenance
The G2’s depth accuracy should be
verified every two years by an authorized
SCUBAPRO dealer.
The tank pressure gauge and the parts of
this product used to measure tank pressure
should be serviced by an authorized
SCUBAPRO dealer every other year, or
after 200 dives (whichever comes first).
Aside from that, the G2 is virtually
maintenance-free. All you need to do is
rinse it carefully with fresh water after each
dive and charge the battery when needed.
To avoid possible problems with your G2,
the following recommendations will help
assure years of trouble-free service:
• Avoid dropping or jarring your G2.
• Do not expose your G2 to intense,
direct sunlight.
• Do not store your G2 in a sealed
container; always ensure free ventilation.
• If there are problems with the water
or USB contacts, use soapy water to
clean your G2 and dry it thoroughly. Do
not use silicone grease on the water
contacts!
• Do not clean your G2 with liquids
containing solvents.
• Check the battery capacity before each
dive.
• If the battery warning appears, charge
the battery.
• If any error message appears on
the display, take your G2 back to an
authorized SCUBAPRO dealer.