26
GALILEO 2 TEK (G2TEK) USER MANUAL
When the safety code is correctly entered
and confirmed by a press of the SAVE
button, the desaturation reset is complete
and the following screen will be shown.
F
NOTE: After a desaturation reset
the change between Scuba, Gauge
and Apnea modes are possible
immediately. However, since the
Gauge and Apnea modes are not
tracking your tissue nitrogen loading,
it is recommended that you maintain
the initial intervals between mode
changes.
WARNING
Diving after a desaturation reset is extremely
dangerous and is very likely to cause serious
injury or death. Do not reset the desaturation
unless you have a valid reason to do so.
F
NOTE: An automatic low battery
switch-off will not reset the
desaturation. The G2TEK stores
tissue saturation information in a
non-volatile memory. During the time
the computer is without power the
desaturation calculation is frozen.
During recharging, the display will light
up and desaturation calculation will
resume as soon as a sufficient level of
charge has been reached.
2 .2 .10
All-silent mode
With the selection ON, the stealth mode
becomes active and no alarms or warnings
will be emitting an audible signal. (The
factory setting is OFF.)
WARNING
The all-silent mode ON selection will disable
all audible dive mode alarms and warnings.
This could potentially be dangerous.
F
NOTE: The only exception to the
stealth mode is the alarm clock, which
will beep when activated, even if the
all-silent mode is activated.
F
NOTE: In order to activate all-silent
mode the safety code 313 must be
entered. This is to prevent accidental
deactivation of dive alarms and
warnings.
