BioDoc-It and VisiDoc-It Imaging Systems
9
Camera Set-up
In the BioDoc-It
The camera and zoom lens are assembled at the
UVP factory.
Remove the cap from the lens.
Attach the step up ring and diopter to the
lens. The step up ring and diopter will only
fit one way.
Using the four thumb screws provided,
secure the bracket to the base.
Slide the camera and lens assembly into the
camera bracket. Slide the lens through the
center hole in the gasket. The gasket forms
a seal around the lens.
Insert and tighten the knob/washer in the
central hole in the camera to secure the
camera to the bracket.
Camera and lens
assembly
Camera cable
Thumb screws
secure the bracket
to the base
Step up ring
Diopter
