Hallett 15xs Instruction Manual
Released on 11-Jul-13 – H800003Q
Page 20
UV Pure Technologies Inc. © 2013
3.
O
PERATING
I
NSTRUCTIONS
The Hallett applies advanced Crossfire Technology, yet is simple to operate. The
automatic quartz cleaning technology has been designed to reduce, and in most
cases, eliminate the periodic shutdowns necessary to inspect the cleanliness of
the quartz. The only required maintenance is the replacement of the two UV
lamps every 12 months (note - if you shut your system down for seasonal use -
the lamp life will be extended)
Unit Functions
AMBER LIGHT
WARNING CONDITION
RIGHT ARROW
ALSO "ENTER"
GREEN LIGHT
UNIT TREATING
RED LIGHT
ALARM CONDITION
UP ARROW
DOWN ARROW
LEFT ARROW
LCD DISPLAY
Figure 2
There is an LCD display, four pushbuttons, and three indicating lights on the front
panel. See Figure 2. The pushbuttons allow you to navigate the menu screens
on the LCD display. See Menu section
LCD Display
The 2 line backlit display provides status information including lifetime remaining
on lamps, message history and setup options. See Menu Section.
Pushbuttons
Left Arrow – press to move back to a previous menu and or to escape from a
menu choice.
Up Arrow – press to move up a menu in a section and also select data whether it
is menu choices or numerical values.
Down Arrow – press to move down a menu in a section and also select data
whether it is menu choices or numerical values.
Right Arrow – press to Enter selection or save value.
Indicating Lights – Positioned on the front Control Panel
Green Light – situated at the bottom, an illuminated green light indicates the
Hallett is treating normally. A flashing green light means the lamps are not yet at
