Chapter 4 Web-based Management
21
Figure 9
WAN Setting
−
Add menu
Note:
you can configure up to seven different connections on
your UT-300R2 ADSL Modem/UT-300R2 by assigning a
number to each configuration using the drop-down menu
corresponding to the
PVC Number
heading. This could be
useful if you have several ISPs and need to configure the UT-
300R2 differently for each. Most users will require only single
PVC, however.
Configuring a Bridged Connection for the WAN
A bridged connection between your ISP and your LAN (the
computers in your house or office) is the simplest type of
connection possible. The UT-300R2 will simply convert the
incoming and outgoing packets to the correct format for each
side of the connection (Ethernet for the LAN, ATM for the WAN).
For a bridged connection it will be necessary for most users to
install additional software (supplied by your ISP) on any
computer that will use the UT-300R2 for Internet access. The
additional software is used for the purpose of identifying and
Summary of Contents for UT-300R2
Page 1: ...UT 300R2 ADSL2 2 Modem USER GUIDE UTStarcom Inc...
Page 84: ......
