UHKVM-70X: 4K HDMI2.0 USB KVM Extender
U.T.E. electronic GmbH & Co. KG
4
www.ute.de
2.2 4K HDMI20 USB KVM Receiver: UHKVM-70XR
Figure 2-2 Front and Rear Panel of UHKVM-70XR (remote unit)
No.
Name
Description
①
Power input
Connect with DC 12V/ 2A power adapter
②
Power indicator
LED indicator turn on when power on
③
Data transmission
indicator
It turns on when the transmitter unit and the receiver unit
connect well with each other, and it flashes when there is no
transmission between the transmitter unit and the receiver
unit
④
Connection
indicator
It flashes when the receiver unit connected well with the
HDMI display device, and it turns off when no transmission
between receiver unit and the display device
⑤
HDBT output
To connect with transmitter by network cable
⑥
HDMI input
Connect with HDMI display device
⑦
RESET button
HDMI IN
Press for restarting the unit
⑧
USB PC
To connect with keyboard/ mouse
⑨
IR receiver
extention cable
interface
Connect with IR receiver extention cable.
Please mahe sure the remote control is within the required
range of IR receiver
⑩
IR blaster
extention cable
interface
Connect with IR blaster extention cable.
Please put IR blaster vlose to the source device to best
transmit the IR signal from receiver
Note
: Pictures shown in this manual are only for reference.
