UH2-88A: 8x8 HDMI 2.0 Matrix w. Audio Matrix/ Downscaling/ AOC
U.T.E. electronic GmbH & Co. KG
30
www.ute.de
Command
Function
Feedback Example
HDCP1.4. Input doesn’t have
HDCP, output is without HDCP.
[xx] =00~08,
xx=01~08 is the number of output
port, if the xx =00, it means all
output ports.
OUT 03 HDCP BYPASSS!
OUT 04 HDCP BYPASSS!
OUT 05 HDCP BYPASSS!
OUT 06 HDCP BYPASSS!
OUT 07 HDCP BYPASSS!
OUT 08 HDCP BYPASSS!
7.3.7 EDID Management
Command
Function
Feedback Example
EDIDMInit.
Restore the factory default EDID
data for each input.
All Input EDID Set Default!
System Initialization......
PTN1111
UH2-88A
V1.0.0
Power ON!
Front Panel UnLock!
EDIDUpgrade[x
x].
Upgrade EDID via Serial Port
⚫
[xx]=00~08
xx=01~08 is the number of the
port(able EDID user-defined for
corresponding HDMI input), if the
xx=00, it means all ports(able EDID
user-defined for all HDMI inputs).
Note:
EDID user-defined can be
used once, if switch to another EDID
or exit, it will not be saved.
⚫
[xx]=U.
xx=U means user-defined for built-in
EDID(It can be saved in machine for
using at any time).
Note: It can user-defined only one
built-in EDID, after finishing it,
machine still use previous built-in
EDID.
When received commands, machine
will remind EDID file (.bin) to send
within 10 seconds.
File size: 256
Baud rate:115200bps
Quired time: About 0
second
Please wait...
Send Completed
！
User
Define EDID Upgrade OK
By RS232 Or GUI!
