background image

UH-4U: 4K HDMI2.0 4x1 Switcher                                                                 

 

U.T.E. electronic GmbH & Co. KG   

 

 

 

 

 

 

www.ute.de

 

Preface 

Read this user manual carefully before using the product. Pictures are shown in this 
manual for reference only. Different models and specifications are subject to real 
product. 

This manual is only for operation instruction, please contact your local dealer or 
distributor for maintenance assistance. The functions described in this version were 
updated till June, 2018. In the constant effort to improve the product, we reserve the 
right to make functions or parameters changes without notice or obligation. Please 
refer to the dealers for the latest details. 

All product function is valid till 2018-06-04.

 

 

Trademarks 

Product model and logo                  are trademarks of U.T.E. electronic GmbH & Co. KG. 
Any other trademarks mentioned in this manual are acknowledged as the properties of 
the trademark owner. No part of this publication may be copied or reproduced without 
the prior written consent. 

 

FCC Statement 

This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. It has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference in a commercial 
installation. 

Operation of this equipment in a residential area is likely to cause interference, in 
which case the user at their own expense will be required to take whatever measures 
may be necessary to correct the interference. 

Any changes or modifications not expressly approved by the manufacture would void 
the user’s authority to operate the equipment. 

                   

                 

 

 

 

Summary of Contents for UH-4U





























Reviews: