UH-4U: 4K HDMI2.0 4x1 Switcher
U.T.E. electronic GmbH & Co. KG
7
www.ute.de
4. Source Button Control
The button
“
AUTO/SOURCE
” on the front panel can be used to select input source
and switch mode.
Press and hold
the button “
AUTO/SOURCE
” for
3 seconds or more
to switch
between the manual and auto modes. (Default: Manual switching.).
4.1 Manual Switching
When the switcher is in manual switching mode, the Switching Mode LED will be
green, and please press
Auto/Source
button to switch to the next input.
4.2 Automatic Switching
When the switcher is in manual switching mode, the Switching Mode LED will be
yellow.
When in auto-switch mode, the switcher follows the rules in the certain circumstances:
⚫
New Input
Upon detecting a new input, the switcher will automatically select the new source.
⚫
Reboot
Once power is restored to the switcher, if the last selected source is still available,
the switcher will still output this signal, otherwise, the switcher will switch to the first
available active input starting at HDMI Input 1.
⚫
Source Removed
When an active source is removed, the switcher will switch to the first available
active input starting at HDMI Input 1.
