11801016 Rev A
2
© 2013 UTC RETAIL
Preparing for Installation
Safety Precautions
DANGER: High Voltage
This unit contains high voltage. There is a risk of electrical shock if the case is opened. If service is required, contact
an authorized service agent or UTC RETAIL (UTC).
WARNING: CMOS Battery Damage
Replace your system's battery only with CR-2032 (or equivalent) 3V Lithium-Ion coin cell battery to avoid risk of
personal injury or physical damage to your equipment. Always dispose of used batteries according to local ordinance,
where applicable. Any damage due to not following this warning will void your motherboard's manufacturer warranty.
WARNING: Access to Internal Components
All access to internal components of the 2170 POS unit is restricted to Authorized Service Personnel only. Opening the
case or service by anyone else will automatically void the warranty on this product.
WARNING: Connect AC Power Cable last
To avoid accidental power-up during installation, connect the AC Power Cable last.
WARNING: Electrical Shock
Use caution when connecting cables. To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits
to telephone-network voltage (TNV) circuits. Local Area Network (LAN) ports contain SELV circuits, and telephone
ports contain TNV circuits. Some LAN ports and some telephone ports use RJ-45 connectors.
CAUTION:
Damage to the logic module components may occur if AC power is not removed from the product prior to attaching any
accessories.
CAUTION:
Do not
use the Magnetic Stripe Reader (MSR) unit as a handle when moving or carrying the 2170 POS.
CAUTION:
Do not
hot plug to the I/O panel serial ports or the serial port adapter cable. Turn off the 2170 POS Unit before
connecting serial port cables.
